The electrically operated systems are designed to meet the requirements of many military “Special Forces” applications with oxygen and helium. This specialised range of systems also has many applications which can exploit its special features.


Electrically driven from a single phase electric motor the system can be supplied to suit most world-wide electrical supplies. This system may be used with oxygen, air, argon, helium, nitrox and heliox mixes.

For quick contact please click the 'Chat now' or 'Leave a message' tab.

NATO Gas Booster

Open for Operation

Closed for Transit

NATO Gas Booster specification

Charging pressures to (5,000 psi) 350 bar

Designed to charge composite cylinders

Operation from -10°C to +50°C

Automated, logic controlled operation

Programmable pressurisation rate

Electrically operated

Over temperature protection

Sand protection

Integrated lightweight transit frame

Integrated charging manifold and hose storage

Fold-out cylinder rack

Integral pull out carrying handles

Make an enquiry here

The control system incorporates a customised logic controller for the system with menu driven alpha-numeric HMI control interface. The customised control allows operators to set required parameters, chose from a set of pre-programmed operating sequences and interrogate fault conditions. System includes electronic outlet pressure measurement through a pressure transducer, also outlet gas temperature measurement. Pressure and temperature are displayed on the display of the HMI. Facility is also included for integration of an external control signal. System control protects the system against excessive pressure and temperature operation. Standard operating programs allow programmable
pressure ramp rates, a feature developed to prevent excessive compression heating during the charging of composite cylinders.

The system is supplied in a robust lightweight fabricated aluminum support frame. The frame is designed to be easily man handled and carried with pull-out portage handles. Closed for transportation the covers protect the system from handling accidents. For operation the system panels fold out allowing access to the control panel and pressure connections. The fold out panel for control access includes a set of basic instructions for operating procedures. The charging access panel folds out to allow access to inlet and outlet charging connectors, a secondary fold out panel also includes a bottle charging rack and distribution manifold suitable for supporting up to six typical 3l cylinders. Alternative charging racks and manifolds can be offered to suit individual applications. The integral tool chest allows storage of hoses, tools and connectors.

System incorporates integral air circulation cooling flow for cooling the gas booster and bottles on the charging rack. Cooling air is filtered through large panel filters resistant to coarse sand ingress. The system includes inbuilt sensing to detect filter blockage. Filters can be simply removed and cleaned.

System is suitable for operation in ambient conditions from -10°C to +50°C. For low temperature operation the system incorporates low temperature protection with pre-start crankcase heating to ensure system lubricants are in operating temperature range.

Based on the proven Stansted TC10C-2312-1412-OX gas booster the system is robust and reliable. Should it be required primary in field service is accomplished through service exchange assemblies which allow operators to simply, quickly and safely rectify the majority of service faults.

All our boosters are marked - European Conformity.

For quick contact please click the 'Chat now' or 'Leave a message' tab.

s